Genicom LN45 - Manual (Page 117)

Aug 01 Genicom Publication No. GEG-99126
GENICOM LN45 and Intelliprint mL450 User Guide 5-13
Replacing the EP cartridge (when options are installed)
11. Close the duplex printing unit.
Replacing the Fuser
The fuser becomes very hot during operation. Never touch the fuser area where a label
indicating high temperature is located (such as that shown below), or else burns may
result. Before replacing the fuser, turn the printer off and wait at least 40 minutes before
replacing it.