Server commands – Genicom LN45 User Manual

Page 201

Advertising
background image

Aug 2001

Genicom

Publication No. GEG-99126

GENICOM LN45 and Intelliprint mL450 User Guide

D-3

Server Commands

Frequently-used Server Commands

Command

Option(s)

Description

DEFINE SERVER BOOTP {EN|DIS}

Enables or disables querying for a BOOTP
host at system boot time.

DEFINE SERVER DHCP {EN|DIS}

Enables or disables querying for a DHCP
host at system boot time.

DEFINE SERVER GATEWAY ipaddress

Specifies the host to be used as a TCP/IP
gateway to forward packets between
networks. Enter an IP address.

DEFINE SERVER
INCOMING option

BOTH

Enables incoming LAT and Telnet
connections.

LAT

Enables only incoming LAT connections.

NONE

Disables incoming connections.

TELNET

Enables only incoming Telnet connections.

PASSWORD

Causes the server to prompt for a password
for all incoming connections.

NOPASSWORD

Allows connections to be established
without prompting for a password.

DEFINE SERVER IPADDRESS ipaddress

Sets the Server’s network IP address.

DEFINE SERVER LOADHOST ipaddress

Specifies the TCP/IP host from which the
Server requests its run-time code.

DEFINE SERVER LOGIN PASSWORD

Sets a new password that will be required
before incoming logins are accepted. You
will be prompted for the new password (up
to 6 alphanumeric characters,
case-insensitive).

DEFINE SERVER NAME

newname

Specifies a new name for the Server.
Names are restricted in length; generally a
name of 11 or fewer characters is
permissible.

DEFINE SERVER NETWARE LOADHOST server

Specifies the NetWare host from which the
Server requests its run-time code. Enter a
file server name of up to 11 characters.

DEFINE SERVER PRIVILEGED PASSWORD

Sets a new password that will be required
for privileged user status. You will be
prompted for the new password (up to 6
alphanumeric characters, case-insensitive).

DEFINE SERVER RARP {EN|DIS}

Enables or disables querying for a RARP
host at system boot time.

Advertising
This manual is related to the following products: