Genicom LN45 - Manual (Page 33)

Aug 01 Genicom Publication No. GEG-99126
GENICOM LN45 and Intelliprint mL450 User Guide 1-15
For standard configuration
Connecting the Ethernet Cable
1. Attach appropriate cable to your Ethernet hub.
2. Attach the opposite end of the cable to the ethernet port on the printer.
Connecting the Power Cord
Connect the printer to an AC outlet as described below.
"
Do not plug the printer into an AC outlet with incorrect voltage.
" Do not use any multi-extension cord connector otherwise there is a risk of fire and electric shock.
"
Do not use extension cords with rated current less than 124V 15A. Never use extension cords with
low capacity, or extreme heat or flame may result. Consult your dealer on the correct type of extension
cord to use.
" Do not damage or modify the extension cord. Also, do not bend, pull, or place heavy objects on the
extension cord otherwise the extension cord may be damaged and result in fire hazard or electric
shock.
" See “Safety Notes” on page B-2.
AC OUTLET POWER CORD
1. Insert the power cord into the AC connector on the printer
WARNING: To prevent the risk of electric shock, never touch the power cord or plug with
wet hands.
CAUTION: When disconnecting the power cord, always grasp the plug and do not pull at the
cable. Damage to the cord can lead to fire and electric shock.