Installation instructions before you begin, Caution, Water valve assembly installation instructions q – GE IM4A User Manual

Page 28: Tools you will need, Attach the water valve, Cut plastic water tubing

Advertising
background image

• Fasten the water valve to the cabinet edge hole

with the hex-head screw (10) from the kit.
DO NOT DRILL ANY ADDITIONAL HOLES.

28

Installation Instructions

BEFORE YOU BEGIN

Read each step thoroughly before proceeding.

•

CAUTION –

Unplug

the Refrigerator. To eliminate the danger
of electric shock during installation, you
must unplug the refrigerator from its
electrical outlet.

WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS Q

Are these the right instructions for your model? Follow the Installation Instructions indicated by
the label on the back of the refrigerator
—

or S

R

Q

P

N

M

L

Flat blade and Phillips

screwdrivers

Pliers

TOOLS YOU WILL NEED

Sharp knife

1/4

″ and 5/16″ Nutdrivers

ATTACH THE WATER VALVE

• Locate the female connector plug (C). Plug

the female connector (C) onto the male terminals
on the water valve
(3). Either wire can go on either
terminal.

2

CUT PLASTIC WATER TUBING

•

Measure 65

″ (165 cm) of water tubing starting

from where it is secured to the water valve. Cut
off excess tubing with a sharp knife or single-edge
razor blade.

1

10

C

3

65

″

(165 cm)

Tape measure

Advertising