Gefen EXT-HD-DSWF - Manual (Page 14)

11
MENU SYSTEM
Setting the Output Resolution
For the best quality video, make sure that the output resolution matches the
native resolution
of the display. For example, if the Digital Signage Player is
being connected to an LCD display, the native resolution will most likely be
1366 x 768, 1280 x 720 (720p), or 1920 x 1080 (1080p).
1. Select the Video Setting option from the Main Menu and press the Enter key.
2. The Video Setting dialog will display the current resolution. Press the
Enter key once again to display a list of the available output resolutions.
Supported Output Resolutions
Auto Detect Full HD 1080i50 (1920 x 1080i, 50 Hz)
VGA (640 x 480, 60 Hz) Full HD 1080i60 (1920 x 1080i, 60 Hz)
SVGA (800 x 600, 60 Hz) Full HD 1080p50 (1920 x 1080p, 50 Hz)
XGA (1024 x 768, 60 Hz) Full HD 1080p60 (1920 x 1080p, 60 Hz)
SXGA (1280 x 1024, 60 Hz) Composite: NTSC
UGA (1600 x 1200, 60 Hz) Composite: NTSC-J (Japan)
WXGA (1360 x 768, 60 Hz) Composite: PAL
WSXGA (1440 x 900, 60 Hz) Composite: PAL-M (Brazil)
WSXGA+ (1680 x 1050, 60 Hz) Composite: PAL-N (Paraguay and
Uruguay)
WUXGA (1920 x 1200, 60 Hz) Composite: PAL-Nc (Argentina)
HD 720p50 (1280 x 720, 50 Hz)
3. Use the Arrow keys to select the desired output resolution. Once the
resolution has been highlighted, press the Spacebar to select it. Press
the Enter key to confi rm the change.
4. Select Done from the Main Menu to save the changes.
IMPORTANT: In order to use the AV Out port (see page 5), the
output resolution must be set to Composite: NTSC. Otherwise,
no picture will be displayed.