Gefen EXT-HD-DSWF - Manual (Page 54)

51
RESETTING THE DIGITAL SIGNAGE PLAYER
Restoring Factory Default Settings
If you forget the Menu System password or need to restore the Digital Signage
Player to the factory settings, the unit will need to be reset.
1. Disconnect power from the Digital Signage Player.
2. Press and hold the Reset button on the front panel with a pin or the end of a
paper clip.
3. While depressing the Reset button, connect the power to the Digital Signage
Player.
4. Wait approximately 10 seconds or until the Status LED fl ashes.
5. Release the Reset button and wait for the Digital Signage Player to reboot.
The reboot process will take approximately 90 seconds.
Reset button Status LED (yellow)
WARNING: Performing a factory reset on the Digital Signage
Player will erase the password to the Menu System, all network
confi guration settings, and delete all content from the Player.