Global Machinery Company PB26D - Manual (Page 3)

3
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the product
or instructions on its use.
Conforms to relevant standards for
electromagnetic compatibility
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Noise label rating 104dBA
(taken at 7.5 meters) you must wear
ear protection at all times.
Warning.
Read these instructions for use carefully.
Use at a distance of at least 15m from
other people.
Blowers and blower vacuums.
Rotating impeller blades can cause sever injury.
Explosive material.
Extremely hot surface. Do not touch a hot muffler,
gear box or cylinder. You may get burned. These
parts get extremely hot from operation and remain
hot a short time after the unit is turned off.
Specifications
Engine: 26cc, 2 stroke
Max. airflow velocity: 234km/h
Max. air volume (wide nozzle): 0.17m 3 /s
Max. engine speed: 7500min -1
Fuel tank capacity: 500ml
Fuel type: Unleaded petrol and
2 stroke machine oil
Fuel mixture: Unleaded petrol/oil:
25:1 (Before 10 hours
operation)
30:1 (After 10 hours
operation)
Equivalent spark plug: CHAMPION RCJ6Y
NGK BPM9A
Sound pressure value: 104dBA
Weight: 5 kg
Noise label rating 104dBA (taken at 7.5 meters) you must
wear ear protection at all times.
Introduction
Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.
104