Gefen PRO I - Manual (Page 34)

28
A/V CINEMA SCALER PRO - CONFIGURATION
Use the ▼ button to select the next option. Use the ▲ option to return to the
previous option.
NOISE REDUCTION
This option will allow the user to apply a noise reduction fi lter to the component
video input sources. This option will only be available when the input source
is component video. The noise reduction fi lter reduces noise that commonly
appears in analog video sources. There are 4 settings to choose from.
To cycle between the noise reduction settings, use either the ◄ or ► or Select
buttons. The change will be immediate and no other buttons need to be pressed
to confi rm the change. The aspect ratio modes and cycle order are listed below.
The noise reduction modes are listed below:
Off
Noise reduction is off
f
Low
Low level video noise reduction is applied
Middle
Moderate level video noise reduction
High
High level video noise reduction (may cause a slight ghosting
effect on objects)
Use the ▼ button to select the next option. Use the ▲ option to return to the
previous option.