Rs-232 serial control commands, Status commands – Gefen PRO I User Manual
Page 53
47
RS-232 SERIAL CONTROL COMMANDS
EDID71
> EDID 7.1
HDMI EDID TYPE 7.1
VGA_AUTO
> AutoConfi g
VGA MODE AutoConfi g
DVI?
> DVI-D DIGITAL or DVI-A
ANALOG
SHOW DVI-D DIGITAL or DVI-A ANALOG
AUDSRC?
> AUDIO SRC=ANALOG or COAX
or OPTICAL
SHOW AUDIO SRC=ANALOG or COAX or
OPTICAL
INFO
> EXT-AVCINEMAA 3.21
07/02/2010
SHOW Latest F/W and date when F/W updated.
Status Commands
Command Code
Response
Description
R OUTPUT
> OUTPUT NATIVE~2K
SHOW OUTPUT STATUS
R SOURCE
> SOURCE HDMI
SHOW SOURCE STATUS
R SIZE
> SIZE FULL~PANSCAN
SHOW SIZE STATUS
R PICTUREMODE
> PICTUREMODE STANDARD~USER SHOW PICTURE MODE STATUS
R CONTRAST
> CONTRAST 0~100
SHOW CONTRAST STATUS
R BRIGHTNESS
> BRIGHTNESS 0~100
SHOW BRIGHTNESS STATUS
R HUE
> HUE 0~100
SHOW HUE STATUS
R SATURATION
> SATURATION 0~100
SHOW SATURATION STATUS
R SHARPNESS
> SHARPNESS 0~100
SHOW SHARPNESS STATUS
R NR
> NR OFF~HIGH
SHOW NR STATUS
R PCHPOSITION
> PCHPOSITION 0~100
SHOW PC H-POSITION STATUS
R PCVPOSITION
> PCVPOSITION 0~100
SHOW PC V-POSITION STATUS
R PCCLOCK
> PCCLOCK 0~100
SHOW PC COLOK STATUS
R PCPHASE
> PCPHASE 0~63
SHOW PC PHASE STATUS
R COLORTEMP
> COLORTEMP NORMAL~USER
SHOW COLOR TEMP STATUS
NOTE:
When using the Bypass Modes the only available commands are:
• S SOURCE
commands
• R SOURCE
command
• INFO
command