Graco Inc. UNICARB Pro AA4500 - Manual (Page 19)

308936 19
Daily Gun Care, Flushing, and Cleaning
6. Lock the trigger safety latch and turn
off the solvent supply.
7. Follow the Pressure Relief Procedure
Warning on page 10.
8. Make sure the trigger safety latch is
locked, then disconnect the solvent (F)
and air (A) supply hoses from the gun.
02341 02338
Fig. 8
F A
9. Unlock the trigger safety latch and trig-
ger the gun into a grounded metal con-
tainer (L) to drain the fluid tube.
Fig. 9 02006
L
10. Lock the trigger safety latch.
11. Dip the end of a soft-bristle brush into
a compatible solvent. Then point the
gun down and clean the front with the
brush and solvent.
01948
02007
Fig. 11
12. Dampen a soft cloth with solvent and
wring-out the excess. Point the gun
down and wipe off the outside.
Fig. 12 02008