Geemarc TP38 - Manual (Page 6)

6
4 The Phone Book
IMPORTANT: When using the phone book features, please note it is only avail-
able at data bank mode (CLIP icon turns off). If the CLIP icon is on, press
CALLER ID/DATA BANK button once.
You can store 100 telephone numbers with associated names in the phone book.
When the memory capacity of 100 numbers has been used, the display will show
the message MEMORY FULL the next time an attempt is made to store a number. In
this case, other telephone numbers must be deleted first.
4.1 To Store Telephone Numbers & Names in the Phone Book
1. Press STORE button. The display will show “SAVE?”.
2. Press STORE button again.
3. Enter the required telephone number with a maximum of 22 digits using the
number pad.
4. Press STORE button.
5. Enter the required name with a maximum of 16 letters. The next section will tell
you how to enter names.
6. Press STORE button. The display will show “SAVED!!”.
4.2 How to enter names
The number buttons are also inscribed with letters for entering the name. By repeat-
edly pressing the appropriate button, upper case letters as well as numbers and
special characters can be entered.
Overview:
1 space + & - / 1
7 P Q R S 7
2 A B C 2 8 T U V 8
3 D E F 3 9 W X Y Z 9
4 G H I 4 0 , . : ; ? 0
5 J K L 5 * ' @ ( ) *
6 M N O 6 # $ _ % ! #
Incorrect entries can be deleted with DELETE button. To do this, move the cursor to
the correct position using the jog dial and then press DELETE button.