Global Machinery Company GLT25 - Manual (Page 12)

12
• Remove the spark plug, put a few drops of oil into the
cylinder and then pull the recoil starter 2 to 3 times in
order to distribute the oil evenly. Replace the spark plug.
Problems
Power loss or sudden stopping of the engine
• Check whether the fuel tank is empty.
• The mixture does not reach the carburettor. Clean the
fuel filter in the fuel tank.
• There is water in the mixture. Drain and rinse all the
fuel system.
• The air filter is dirty. Clean the air filter.
• There are carbon deposits in the cylinder exhaust pipe or
the muffler. Clean those or change the muffler.
Bad quality cut
• Overloaded cutting due to too high grass or too thick for
engine power.
• Wrapped vegetal material on the cutting tool.