Global Machinery Company GLT25 User Manual

Page 5

Advertising
background image

5

Turn tool off completely before making any

adjustments, changing accessories, or storing power

tools. Such preventive safety measures reduce the risk

of starting the power tool accidentally.

Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from intended could result in a

hazardous situation.

Service

Have your power tool serviced by a qualified repair

personnel using only identical replacement parts.

This will ensure that the safety of the power tool

is maintained.

Additional safety rules for petrol line

trimmers

Do not operate in a hazardous location. Such areas

include where there is a risk of explosion of petrol

fumes, leaking gas or explosive dust.

Do not operate in a confined area. Exhaust gases,

smoke or fumes could reach dangerous concentrations.

Protect your tool. This line trimmer is NOT

WEATHERPROOF and should not be exposed to direct

sunlight, high ambient temperature and damp, wet or

high humidity conditions.

Do not smoke while refuelling. This is potentially

dangerous as it may ignite the fuel and cause an

explosion.

Take care not to spill fuel. When refuelling the line

trimmer ensure that the motor has been switched off.

Prevent the spilling of fuel as this may also ignite with

the hot motor. Never refuel whilst the engine running.

Be careful where you store the line trimmer. Store

the line trimmer in a dry area away from flammable

liquids.

Keep your distance. The line trimmer emits exhaust

fumes. Ensure bystanders keep a safe distance.

Ensure you use oil-mix fuel. Ensure that you

mix

40 parts unleaded fuel to 1 part 2-stroke oil. If not,

the engine will overheat and cause damage to your

line trimmer.

Never fill fuel tank indoors. Never fill fuel tank when

engine is running or hot. Do not smoke when filling

fuel tank.

Unpacking

Due to modern mass production techniques, it is unlikely

that your petrol line trimmer is faulty or that a part is

missing. If you find anything wrong, do not operate the

tool until the parts have been replaced or the fault has

been rectified. Failure to do so could result in serious

personal injury.

Contents of carton

Handle, upper and lower with attaching bolt and nut

Secondary handle with attaching bolt and nut

Safety guard with attaching bolt and wing nut

Spool removal spanner

Spark plug wrench

Carry strap

Instruction manual

Advertising