GoVideo DVP745 - Manual (Page 15)

ON/OFF
PHONES
OPEN/CLOSE FWD REV PLAY
PAUSE
PREV NEXT
STOP
1. Connect the DVD player to your TV and amplifier.
2. Turn on the TV.
3.
4. Turn down the volume on your amplifier, and then power it on.
5.
Set the TV to the AV input connected to the DVD player.
Set the amplifier to the AV input connected to the DVD player.
Basic Operation
Basic Playback
STEP - Press the ON/OFF
switch, and the player will
start. "LOAD" is illuminated
on the display and the logo is
displayed on TV screen.
STEP 2 - Press OPEN/CLOSE
button either on front panel or re-
mote control, The player displays
"OPEN” on the display. When the
tray is open, please put the disc on
the tray with the label side up. Press
OPEN/CLOSE again to close the
disc tray.
STEP 3 - Press the PLAY
button on the front panel or
remote control. The player
will automatically read and
identify the disc, display the
type and total time, and begin
playback.
Preparation before playing:
-14-