Gefen ex-tend-it 4x4 HDTV Matrix - Manual (Page 4)

INTRODUCTION
Thank you for purchasing the 4x4 HDTV Matrix.
The 4x4 HDTV Matrix switches four HDTV sources to any four DVI displays.
The 4x4 HDTV Matrix switcher has four DVI inputs and four DVI outputs. Matrix input #1
and the DVI port of source #1 connects using a male to male DVI cable. The DVI port of
source #2 connects to DVI input #2. The DVI port of source #3 connects to DVI input #3.
The DVI port of source #4 connects to DVI input #4. There are four (4) DVI outputs con-
necting to four (4) different displays.
Note: The switching is done by using either the the RMT-16-IR remote control or through
the RS232 port. The 4x4 HDTV Matrix is rack mountable. Any HDTV with HDMI inputs can
be connected to the DVI outputs of the matrix by using a DVI to HDMI adapter or cable.
1
OPERATION NOTES
READ THESE NOTES BEFORE IN STALL ING
OR OPERATING THE 4X4 HDTV MATRIX
• You should connect all the cables and power supply prior to connecting power to the
HDTV sources and 4x4 HDTV Matrix.
• When powering the sources, the display needs to point to the source input.
• The 4x4 HDTV Matrix is housed in a metal box for better RF shielding.
• The 4x4 HDTV Matrix works with all DVI and HDMI displays.
• The 4x4 HDTV Matrix only supports VIDEO signals.
• The 4x4 HDTV Matrix is fully HDCP compliant.