GE X500 - Manual (Page 17)

14
7XUQLQJ2QDQG2Ȗ
3XVK212))WRWXUQRQRȖFDPHUD
After the camera is powered on, set the camera to Auto mode
by turning the Mode dial at the top of the top of the camera
VHHSDJH :KHQXVLQJWKHFDPHUDIRUWKH½UVWWLPHWKH
language setting page will appear.
Setting Language and Date/Time
:KHQWXUQLQJRQWKHFDPHUDIRUWKH½UVWWLPHWKH'LVSOD\
Language and Date/Time Setup menu will appear. Use the
following procedures to set the camera to your preferences:
1. Push ON/OFF to turn on the camera.
2. Press Up/Down/Left/Right button to select the settings.
3. Press the EXWWRQWRFRQ½UPWKHVHWWLQJV
Set Display Language
1. Press the button and the Left/Right button and select
the General Setup menu tab.
2. Use the Up/Down button and scroll down to Language.
Then press the Right button to access the language
options.
3. Use the Up/Down/Left/Right buttons to select the desired
language.
4. Press the EXWWRQWRFRQ½UPWKHVHWWLQJ