GE X500 - Manual (Page 67)

64
Beep
Use this setting to adjust the volume of the beep emitted when
buttons are pressed and change the tones for the Shutter
EXWWRQVHOIWLPHUDQGSRZHURQSRZHURȖ
To change this setting:
1. Select the Beep setting from the Setup menu as described
previously.
2. Use the Up/Down navigation buttons to switch between
YROXPHVKXWWHUNH\VHOIWLPHUDQGSRZHUWRQH½HOGV
3. Press the Right button, then press the Up/Down button to
adjust the volume or change the tone, and press the
EXWWRQWRFRQ½UPWKHVHWWLQJ
LCD Brightness
Use this setting to adjust the brightness of your LCD screen.
1. Select the LCD Brightness setting from the Setup menu
as described previously.
2. Select auto or adjust the brightness level using the
Left/Right button, and press the EXWWRQWRFRQ½UPWKH
setting.