Golden Technologies GB 101 - Manual (Page 27)

Buzzaround Owner’s Manual - Updated 092605
Page 27
DISASSEMBLING YOUR GB 101 BUZZAROUND ™
Step 6 - Loosen tiller adjustment knob and fold the tiller down flat. Be careful not
to scratch the tiller head on the locking mechanism. Then tighten the adjustment
knob to secure the tiller in its new position. Once the tiller is flat, you may use it
as a handle for easy transportation.
Loosen this knob to lay tiller flat
Step 7 - Lock tiller lock – This knob is found just above the front wheel. You
should lock the front wheel to keep it from turning side to side to help control
while carrying.
Step 8 - Switch the “brake” lever to the “freewheel” position.
Back for Freewheel Forward for Drive
Tighten
knob
fully
before
lifting!
DUE TO CHANGES IN OUR MANUFACTURING PROCESS, THE FREEWHEEL LEVER
MAY WORK DIFFERENTLY THAN IN THE IMAGES SHOWN ABOVE. PLEASE REFER
TO THE FREEWHEEL LEVER DECAL LOCATED NEXT TO THE FREEWHEEL LEVER
FOR THE PROPER POSITION FOR LOCKING AND UNLOCKING THE BRAKE LEVER.