Go-Video R6530 - Manual (Page 43)

43
Basic
Set
u
p
G
etting
Sta
rted
DVD
Recording
DVD
Playb
a
ck
Ad
vanc
e
d
Se
tti
n
gs
He
lp
• If this is the first time you have entered the password, you will be
prompted to enter it again to confirm.
• Use the / buttons to select the desired rating (from 1-Kids
Safe to 8-Adult).
• Press Play /Enter to confirm your selection.
Password
Sets or changes the password for the Ratings feature:
• Use the / buttons to select Password and press Play /Enter.
• Enter a 5-digit password and press Play /Enter. Store the pass-
word in a safe place so you can recall it later.
• You will be prompted to enter the password again to confirm.
Screen Saver
Enables or disables Screen Saver:
• Use the / buttons to select Screen Saver and press Play /
Enter.
• Use the / buttons to select On or Off.
• If you select On, the DVD+RW icon will appear whenever the
unit is left alone for several minutes to protect your TV screen.
Angle Mark
Enables or disables Angle Marks during DVD playback:
• Use the / buttons to select Angle Mark and press Play /
Enter.
• Use the / buttons to select On or Off.
• If you select On, a camera icon will appear on screen whenever an
alternative angle is available during DVD playback.
Factory Reset
Resets all Setup menu options to their original settings.
• Use the / buttons to select Factory Reset.
• Use the
/ buttons to select Confirm or Cancel. If you select
Confirm all custom settings will be lost and the DVD Recorder
will restart in Initial Setup mode, see page 14.
:: Disc Media Settings
Use to finalize a DVD+R disc or erase a DVD+RW disc. Only avail-
able when a DVD+R/+RW is loaded.
1 Press Setup.
2 Use the / buttons to select Disc Media and press Play /
Enter.
3 Choose from the following:
Finalize DVD+R
Finalizes a DVD+R disc so it will play in most DVD players.
• Use the / buttons to select Finalize.
• Use the
/ buttons to select Confirm (or Cancel). If you select
Confirm, the DVD+R will be closed to further recording and will
be compatible with most DVD players.
Erase DVD+RW
Erases a DVD+RW disc so it can be recorded over again.
• Use the / buttons to select Erase.
• Use the
/ buttons to select Confirm (or Cancel). If you select
Confirm, the DVD+RW will be erased.
Disc Media Menu