Garmin Ghc 10 - Manual (Page 12)

Powerboat Autopilot Operation
8 GHC 10 Owner’s Manual
The autopilot follows the man overboard pattern, and the heading screen
shows the direction of the turn ➀.
➀
TIP: To quickly resume a pattern after you make a heading adjustment with
the helm or the soft keys ( page 3 ), select the center soft key twice.
Cancelling a steering Pattern
While following a steering pattern, perform one of the following actions:
• Physically steer the boat at the helm (if your autopilot is equipped
with Shadow Drive).
• Use the soft keys to manually adjust the heading.
• Select STBY.
gPs steering Patterns
‹ CaUTIOn
You are responsible for the safe operation of your boat. Do not begin a GPS
pattern until you are certain that the water is clear of obstacles.
The autopilot can steer the boat along a route defined by your GPS device,
or in preset patterns based on a GPS location (waypoint). To use GPS
steering, you must have a compatible GPS device connected to the autopilot
using NMEA 2000 or NMEA 0183. For more information on connecting a
compatible GPS device, see the autopilot installation instructions.
GPS steering patterns are based on a GPS waypoint to which you are
actively navigating using your optional GPS device. This waypoint is called
the active waypoint.