Garmin GPSMAP 3005C - Manual

GPSMAP
®
3005C
quick reference guide
Finding an Item
To find an item from your current location:
1. From any page, press FIND to open the Find From Current Position Page.
2. Highlight a category, and press ENTER. For some categories, you might need to
select multiple subcategories.
3. Highlight an item in the search results list, and press ENTER. The Review Page
appears showing item information, map location, chart name, distance/bearing, and
options for creating a waypoint or viewing the next item in the search results list.
Marking a Waypoint
To mark your current location:
1. Press and hold ENTER/MARK until the Review
Waypoint Page appears. The GPSMAP 3005C
captures your current location, and then creates a
default name and symbol for the new waypoint.
2. To accept the waypoint with the default information,
press ENTER, or to change any waypoint information,
highlight the appropriate field and press ENTER.
To create a ne�� ��aypoint from a map feature: create a ne�� ��aypoint from a map feature:
1. Use the map pointer to highlight a map feature.
2. Press and release
ENTER/MARK to capture the
pointer location and open the Review Page.
3. Press the Create Wpt soft key to open the Review
Waypoint Page.
4. To accept the waypoint with the default information,
press ENTER, or to change any waypoint information,
highlight the appropriate field and press ENTER.
Navigating to a Destination
To navigate to a destination
1. Press NAV to access the Navigation menu.
2. Highlight Go To Point, Follo�� Route, Follo�� Track, or TracBack, and press ENTER.
3. Use the ROCKER to highlight a point, track, or route from the list, and press ENTER.
4. If you selected a point, press the Go To soft key. If you selected a route or saved track,
choose from the selections, and press ENTER.
5. Follow the magenta route created on the Map Page. You can also use the Compass Page
to help you navigate.
Using the MOB (Man OverBoard) Feature
The Man OverBoard function (MOB) simultaneously marks and sets a course back to the
marked location for quick response to emergency situations.
To start the MOB function:
1. Press and hold NAV/MOB. A message
appears asking you if you want to begin
navigation to the MOB waypoint.
2. Press ENTER to begin navigating to the
MOB location.
3. To stop navigation to the MOB location, press
NAV, highlight Stop Navigation, and press
ENTER.
Revie�� Waypoint Page
Revie�� Map Point
Navigation Sho��n on the Map Page Navigation Menu
Find From Current Position Page Revie�� Waypoint Page
Man OverBoard To stop navigation to the MOB location:
1. Press NAV/MOB.
2. Highlight Stop Navigation, and press ENTER.