GE ZGU384LSMSS - Manual

For answers to your Monogram, ® GE Profile ™ or
GE ® appliance questions, visit our website at
ge.com or call GE Answer Center ® service,
800.626.2000.
130241 Specification Revised 6/07
Listed by
Underwriters
Laboratories
ZGU384LSMSS/ZGU384NSMSS
GE Monogram ® 30" Stainless Steel Gas Cooktop
Dimensions and Installation Information (in inches)
Note: The cooktop cutout is rectangular.
The bowed front edge of the cooktop will sit on top
of the counter.
These cooktops may be installed in combination with a
Monogram downdraft vent, a Monogram single oven or a
Monogram warming drawer. See installation instructions
for details.
Model ZGU384NSMSS - Natural Gas
Model ZGU384LSMSS - Liquid Propane
These stainless steel cooktops are factory set for natural or
liquid propane gas. Be sure to order the correct model for
the installation situation.
2-7/8“ Min.
from Cutout
to Rear Vertical
Combustibles
19-5/8”
30-3/4”
21-5/8”
Deep at Center
28-1/2”
30” Min.
Cabinet Base
2-1/2” Min.
from Cutout
to Front of
Countertop
12” Min.
from Cutout
to Side Walls
3-3/4”
Note: Reference Instructions, GE Monogram 30”
Stainless Steel Cooktop Installation, packed with
product, for complete details.
The house gas supply should be at least 1" from
the back wall.
The electrical outlet should be 12" below the
countertop and within reach of the 4 ft. power cord.