Grizzly G5954 - Manual (Page 12)

-10-
G5954 5HP Dust Collector
Inventory
After all the parts have been removed from the
two boxes, you should have the following items:
Large Component Inventory (Figure 2) Qty
A. Casters (shown attached to base plate) .... 4
B. Base Plate .................................................. 1
C. Motor/Fan Assembly .................................. 1
D. Stand Legs ................................................. 4
E. Collector ..................................................... 1
Small Component Inventory (Figure 3) Qty
F. Gasket ........................................................ 1
G. 4-in-1 Inlet Adapter and Inlet Caps ............ 1
H. Upper Bag Support Extenders ................... 2
I. Lower Support ............................................ 1
J. Upper Bag Supports ................................... 2
K. Plastic Elbows 4" 90º ................................. 2
L. Lower Bags ................................................ 2
M. Upper Bags ................................................ 2
Other Components and Hardware Qty
• Flange Bolts 3 ⁄
8
-16 x 1 ⁄
2
" (A, B, C, D) ........ 32
• Washers 3 ⁄
8
" (D, E) ................................... 16
• Hex Nuts 3 ⁄
8
-16 (C, E, F) ............................ 8
• Hex Bolts 3 ⁄
8
-16 x 1 1 ⁄
4
" C, E, F) ................... 8
• Flange Bolts 5 ⁄
16
-18 x 3 ⁄
4
" (I, J) ................... 6
• Hex Nut 5 ⁄
8
-11 (I) ......................................... 1
• Flange Bolts 1 ⁄
4
-20 x 1 ⁄
2
" (H, J) ................... 4
• Lower Support Foot Pad 5 ⁄
8
-11 ................... 1
• Open-End Wrench 10/12mm ...................... 1
• Bag Clamps ................................................ 4
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
NOTICE
Some hardware/fasteners on the inventory
list may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are miss-
ing.
SECTION 3: SET UP
Figure 2. G5954 Large Component Inventory.
D
C
A
B
E
Figure 3. G5954 Small Component Inventory.
F
G
H
I
J
K
M
L