GE JGRS14 - Manual (Page 25)

25
QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM POSSIBLE CAUSE
“F–AND A NUMBER • This is a function error code. Press CLEAR/OFF. Allow the oven to cool one
OR LETTER” FLASH hour. Place the oven back into operation.
IN THE DISPLAY
• Disconnect all power to the oven for 5 minutes and then reconnect power. If the
failure code repeats, call for service.
CONTROL SIGNALS • This is reminding you to press BAKE and then enter a temperature.
AFTER ENTERING
• This is reminding you to enter a bake temperature after having pressed BAKE.
COOKING TIME OR
DELAY START TIME
DISPLAY GOES BLANK • The circuit breaker in your house has been tripped, or a fuse has been blown.
DISPLAY FLASHES • Power failure. Reset the clock.
UNABLE TO GET THE • BAKE and BROIL HI/LO must be pressed at the same time and held for
DISPLAY TO SHOW “SF” 2 seconds.
CLOCK AND TIMER • Check for power outage.
DO NOT WORK
OVEN LIGHT DOES • The light bulb is loose or defective. Tighten or replace.
NOT WORK
• The pad operating the oven light is broken. Call for service.
FOOD DOES NOT • The oven controls are not properly set. See the Broiling section.
BROIL PROPERLY
• Improper shelf position being used.
• Food is being cooked on a hot pan.
• Cookware is not suited for broiling.
• The oven door and/or the broiler compartment door not closed.
• Aluminum foil used on the broiler pan grid has not been fitted properly
and slit as recommended.
FOOD DOES NOT • The oven controls are not properly set. See the Baking or Roasting section.
ROAST OR BAKE
• Shelf position is not correct.
PROPERLY
• Incorrect cookware or cookware of improper size is being used.
• Oven thermostat needs adjustment. See the Adjust the Oven Thermostat—
Do It Yourself section.
(continued next page)
Car
e and Cleaning
Minor Adjustments
Pr
oblem Solver