Before you start – Grizzly 14.4v 3/8" Cordless Drill G8594 User Manual

Page 6

Advertising
background image

G8594 14.4V Cordless Set

-6

-

BEFORE YOU START

First review the contents of your cordless

tool kit and familiarize yourself with the key

components:

Heavy-Duty Case

Cordless Drill

Cordless Detail Sander

Cordless Jig Saw

Saw Blade

Battery Pack

1 Hour Charger

The battery in your new cordless power

tool will not be fully charged when you

receive it. To maximize the storage capac-

ity of the battery it should be completely

discharged, then fully recharged 3-5 times.

For optimal life span, completely discharge

the battery before recharging. Follow the

instructions below to charge your battery.

Battery charging with the 1 hour
“Smart” charger (1 piece charger):

1.

Plug the charger into an appropriate

110/120V outlet.

2.

Insert the battery into the charger.

The battery fits into the oval recess in

only one way. Do not force the bat-

tery. Insert until it locks into place.

3.

The green light over the word “OFF”

on the control panel should come on.

If it doesn’t, make certain the wall out-

let you are plugged into is working. If

the outlet power is okay, the fuse

inside the charger may have blown.

Fuses should be replaced by a quali-

fied electrical technician.

Never leave a battery unattend-
ed while charging. While charg-
ing will make the battery and
charging unit warm, if it
becomes hot to the touch, dis-
connect the charger immediate-
ly. There is a possibility of fire
hazard. Have the battery and
charging unit checked by a qual-
ified electrical service techni-
cian.

4.

To begin charging, press the “SET”

button. A steady red light over the

word “ON” should come on indicating

the battery is being charged.

5.

When the battery is fully charged, the

red light will go off and the unit will

stop charging. Remove the battery

from the charger upon completion of

the charge cycle.

Advertising