Global Machinery Company DEC004DC - Manual (Page 2)

2
Contents
Warranty Power Tools
Whilst every effort is made to ensure your complete
satisfaction with this tool, occasionally, due to the mass
manufacturing techniques, a tool may not live up to our
required level of performance and you may need the
assistance of our service department.
This product is warranted for a 2-year period for home
domestic use from the date of the original purchase.
If found to be defective in materials or workmanship,
the tool or the offending faulty component will be repaired
or replaced free of charge with another of the same item.
A small freight charge may apply. Proof of purchase is
essential. We reserve the right to reject any claim where
the purchase cannot be verified.
This warranty does not include damage or defects to the
tool caused by or resulting from abuse, accidents,
alterations or commercial or business use. It also does not
cover any bonus items or included accessories. Only the
powertool is covered under this warranty.
With continuing product development, changes may have
occurred which render the product received slightly
different to that shown in this instruction manual.
Please ensure that you store your receipt in a safe place.
Conditions apply to the above warranty. For full details of
the warranty terms and conditions please refer to our
website – www.gmcompany.com
For prompt service we suggest you log your service
request online - www.gmcservice.com.au, should you
not have access to the internet, please contact our
service department on 1300 880 001 (Australia)
or 0800 445 721 (New Zealand).
Warranty 2
Introduction 3
Environmental protection 3
Description of symbols 3
Specifications 3
General safety rules 4
Additional safety instructions for rotary tools 5
Additional safety instructions for the charger 6
Additional safety instructions for the battery pack 7
Know your product 8
Unpacking 9
Accessories 9
Accessories for DEC004DC 9
Fitting and removing the battery pack 11
Battery charging 11
Obtaining the longest life from the battery 11
Operation 11
Switch on 12
Switch off 12
Varying the speed 12
Quick reference guide 12
Holding the tool 12
Changing the collet 12
Changing accessories 13
Locating a cutting/sanding disc 13
Locating a sanding drum 13
Attaching the flexible shaft 14
Changing the collet and accessories on the flexible shaft 14
Setting up the height adjustable mounting stand
14
Maintenance 15
Cleaning 15
Repairs 15