Vii. disassembly – Golden Technologies GC440 User Manual

Page 22

Advertising
background image

Companion Owner's Manual: GC240, GC340, GC440

Companion

22

1. REMOVING THE SEAT

NOTE: Pinchless seat hinges are
standard on all Golden Companion
scooters.


1. Remove the key.
2. Make sure that the scooter brake is en-

gaged.

3. Loosen the adjustment knobs. Slide the

arms off the scooter if you are not able to
carry the seat with the weight of the arm-
rests attached. See figure 5.

4. Remove the seat by pulling up and hold-

ing the seat lever and lifting the seat
straight up and out of the seat post. See
figure 14.

5. The seat can be folded for compact

storing.


2. REMOVING THE REAR SHROUD
1. Pull up on the sides of the shroud.
2. Lift the shroud up and off the scooter. See

figure 15.


3.

REMOVING THE BATTERIES

1. After removing the shroud, loosen the

Velcro™ straps from around each battery.
See figure 16.


VII. DISASSEMBLY

FIGURE 14.

FIGURE 15.

FIGURE 16.

VELCRO™ STRAPS

Advertising
This manual is related to the following products: