Golden Technologies GC440 - Manual (Page 25)

Companion Owner's Manual: GC240, GC340, GC440
Companion 25
VIII. ASSEMBLY
WARNING: Do not sit in or attempt to move your Companion unless the
frame are rear carriage are securely engaged. Accidental separation of
the frame from the rear carriage may occur and cause injury of damage.
4. REINSTALL THE SEAT.
1. Make certain that the seat post is
mounted in the seat post pedestal and
adjusted to the desired height.
2. Raise and hold the seat swivel lever and
then lift seat and position the seat swivel
post into the seat post. See figure 23.
3. Push down on the seat to make certain
that the seat swivel post is fully inserted
and locked. See figure 24.
WARNING: Failing to assure
proper installation of the seat
could result in injury.
5. REINSTALL THE ARMRESTS.
1. Insert the right arm into the arm bracket.
2. Tighten the right arm bracket adjustment
knob.
3. Insert the left arm into the arm bracket.
4. Tighten the left arm bracket adjustment
knob.
Your Golden Companion is now successfully
assembled.
FIGURE 23. SEAT SWIVEL LEVER UNLOCKED
FIGURE 24. SEAT SWIVEL LEVER LOCKED
SEAT SWIVEL LEVER
SEAT SWIVEL LEVER