GIGABYTE 5225 - Manual (Page 21)

Hardware Installation Process
English
- 17 -
Line In (Rear Speaker)
MIC In (Center and Subwoofer)
Line Out (Front Speaker)
y Audio Connectors After install onboard audio driver, you may con-
nect speaker to Line Out jack, microphone to MIC
In jack. Device like CD-ROM,walkman etc. can
be connected to Line-In jack.
Please note:
You are able to use 2-/4-/6-channel audio feature
by S/W selection.
If you want to enable 6-channel function, you
have 2 choose for hardware connection.
Method1:
Connect "Front Speaker" to "Line Out"
Connect "Rear Speaker" to "Line In"
Connect "Center and Subwoofer" to "MIC Out ".
Method2:
You can refer to page 25, and contact your
nearest dealer for optional SUR_CEN cable.
If you want the detail information for 2-/4-/6-channel audio setup
installation, please refer to page 64.
According to your motherboard, please see the
following descriptions for the devices. Device
like printer can be connected to Parallel port;
mouse and modem etc. can be connected to
Serial ports.
w Parallel Port, Serial Ports COM1 / COM2
COM1 COM2
Serial Port (9 pin Male)
7n400e_1001_q.p65 2003/7/17, ¤U¤И 02:58 17