GIGABYTE 5225 - Manual (Page 28)

- 24 - GA-7N400E(-L) Motherboard
English
+
_
10) RAM_LED
Do not remove memory modules while RAM_LED is on. It might cause short or other unexpected
damages due to the stand by voltage. Remove memory modules only when AC power cord is
disconnected.
+
_
11) 2X_DET
When an AGP 2X (3.3V) card is installed the 4X_AGP will light up, indicating a non-supported
graphics card is inserted. Informing users that system might not boot up normally due to AGP 2X
(3.3V) is not supported by the chipset.
7n400e_1001_q.p65 2003/7/17, ¤U¤И 02:58 24