Battery installation – Graco PD135573A User Manual

Page 9

Advertising
background image



If temperature is higher than 99.5˚C
(37.5˚C ), you will hear 10 beeps and the
LCD will flash, letting the user know that a
fever has been detected.
• Wait 30 minutes after physical exercise,
bathing, eating, or drinking before taking
a temperature reading.
• Do not expose the thermometer to
extreme temperatures, direct sunlight,
dust, or electricity.

BATTERY INSTALLATION

The thermometer includes one CR1225
3-volt lithium battery already installed. The
approximate life of this battery is 3 years.
When the low battery symbol (

) appears

on the LCD, follow these instructions for
changing the battery.

1. Use a coin to open battery cover from the
back of the thermometer

1

-

2

.

2. Remove the battery using a non-metallic
tool and discard immediately

3

.

3. Install a new CR1225 3-volt lithium battery
with the positive side (+) facing up

4

.

4. Replace the battery cover

5

.

1

2

3

4

5

Advertising
This manual is related to the following products: