Gefen CAT-5 4000 - Manual (Page 9)

6
SENDER PANEL DESCRIPTIONS
9 Channel 3 VGA/RS-232 and DVI/DDC RJ-45 Ports
These RJ-45 ports connect the CAT5•4000 sender to a CAT5•4000 receiver unit
using CAT-5, CAT-5e or CAT-6 cabling. When the input source is analog, the
VGA/RS-232 port is used. When the input source is digital, the DVI/DDC port
is used. If RS-232 is required when using a digital input source, use both RJ-45
ports.
10 Channel 3 DVI Input
Connect an analog or digital source to this DVI-I input port.
11 5V DC Power Receptacle
Connect the included 5V DC power supply between this input and an open wall
power socket.