User instructions – Stovax Marlborough & Stockton Coal Effect Stove Range User Manual

Page 6

Advertising
background image

6

USER INSTRUCTIONS

Medium Ceramica

6.1 Place the flame baffle onto the shelf at the rear of the tray

and push up against the rear ledge, see Diagram 3.

AR0365

3

6.2 Locate the front coal moulding in front of the flame baffle

ensuring that the end legs sit flat against the burner skin, see

Diagram 4.

AR0366

4

6.3 Place three large coals on the front coal so that they lean

against the flame baffle, and the four large coals on the

flame baffle so that they sit on the fingers, see Diagram 5.

AR0367

5

6.4 Place two small coals at each end of the front coal so that

they lean against the flame baffle, and a further two large

coals on the flame baffle, one at each end, see Diagram 6.

AR0368

6

6.5 Place five small coals along the rear of the flame baffle,

resting against the rear ledge, see Diagram 7.

AR0369

7

6.6 Ensure that the fibreglass seal on the back of the door is intact,

locate the door on the four studs and slide back to the firebox.

Secure in place using the four dome nuts and the tool

supplied, do not over tighten the nuts, see Diagram 8. Keep

the tool with these instructions for future use.

NEVER OPERATE THE STOVE WHEN THE DOOR IS

REMOVED OR WHEN THE GLASS IS BROkEN.

AR0390

8

Advertising