GIGABYTE G-MAX N501 - Manual (Page 49)

39
G-MAX
TM
N501 User’s Manual
4.4 Memory Modules
You can add more memory modules to your notebook computer G-MAX N501
in order to obtain better performance.
To install a memory module:
1. Remove the two screws securing the
Memory Module Cover.
2. Lift off the Memory Module Cover.
3. There are two memory module slots
available. The first one is already
occupied by your notebook computer
G-MAX N501’s current memory
module. Place the new memory
module in the second slot, matching
up the notch along its connector rim
with the tooth in the connection slot.
4. When the module has been securely seated, press down gently on it until
it snaps into place.
Depending on how much additional memory you require, you may
need to replace the original memory module.
To remove a memory module:
1. Follow the first two steps in the
previous procedure.
2. Push away the two silver latches that
holding the memory module in place,
and the memory card will
automatically pop out.
3. Gently remove the memory module
by holding onto its edge along the
side of the memory card.