GIGABYTE G-MAX N501 - Manual (Page 66)

56
G-MAX
TM
N501 User’s Manual
The default value for this field is: LPT1, 378, IRQ 7
Changing the default address and IRQ settings for the Serial and LPT
Port can cause conflicts with other installed peripherals.
• Port Definition
This field allows you to configure your notebook computer G-MAX N501's LPT
Port transmission mode. The following options are available:
—
Standard
—
Bidirectional
—
Enhanced Parallel Port (EPP)
—
Extended Capabilities (ECP)
EPP and ECP are bidirectional modes, allowing both data input and output. The
EPP and ECP modes are only supported with EPP- and ECP-aware peripherals.
DMA Setting for ECP Mode – This field is only available when the Port Definition
is set to ECP.
The following options are available:
—
DMA 1
—
DMA 3
The default value for this field is: DMA 1
• Legacy USB
Enables or disables legacy USB device support.
Use the [SPACE] bar to select the Legacy USB option or not.