Golden Technologies GP601 - Manual (Page 11)

Compass Owner’s Manual – Models # : GP600 SS, GP600 CC, GP601 SS, GP601 CC Revised 11/30/06
11
ASSEMBLY
JOYSTICK INSTALLATION
1. Position the joystick on the joystick bracket. Match the holes in the joystick with the
holes in the bracket. See figure 1.
2. Insert the 4 Allen-head screws with lock washers through the bracket and into the
holes in the joystick.
3. Use an Allen wrench to tighten the screws.
4. Connect the joystick cable to the controller cable. See figure 2.
5. Use the provided Velcro® tie-wraps and under arm clip to secure the controller cable
to the armrest bracket.
Figure 1
Figure 2
Allen-head screws
Joystick Bracket
Joystick Cable