Comfort settings – Golden Technologies GP601 User Manual
Page 16
Compass Owner’s Manual – Models # : GP600 SS, GP600 CC, GP601 SS, GP601 CC
Revised 11/30/06
16
COMFORT SETTINGS
Adjusting the seat with a front to rear angle
Loosen seat guide adjusting bolts using a 6mm Allen wrench provided in the charger bag
and a pair of pliers or a 13mm open end wrench. Place the seat receivers in the lowest
position and insert the ball detent pins through the towers and seat receiver legs. Leave
the seat guide adjusting bolts loose. Slide the seat into the receivers, adjust seat to the
desired height and angle using the (4) detent pins. Leave the seat in the seat receivers
and tighten the seat guide adjusting bolts. This process is more easily accomplished
with two people. Note: seat receivers must be 2” higher when using NF22 battery cover.
Seat
Tower
Seat Guides
Front Seat Locking
Handle
Bottom of
Seat
Seat
Guide
Adjusting
Bolts
Seat Angle
Adjusting Pins