Go-Video 4-Head Hi-Fi - Manual (Page 37)

CHAPTER 3 - PROGRAMMING YOUR DUAL-DECK VCR 31
Date/Time Stamp [Menu, 1, 5] *
This option allows you to determine if you want the
current date and time recorded onto the beginning of
your recording. Select OFF if you don’t want the
current date and time recorded; select ON if you do
want the date and time recorded.
1. Press 5 to select this item. Subsequent pressings
of this number will cycle this feature between ON
and OFF.
You can also use
SELECT
(Mute button) to highlight
this item and
CHANGE
(LCV button) to change
this feature.
2. When the desired setting is shown on the screen,
either press MENU to exit this menu or move to
another item.
Second TV View [Menu, 1, 6] *
This option allows you to send audio/video signals to a
separate second monitor.
If you select Auto, the signal is the same as the main
TV view. The picture selected with the
VIEW
key is
available to both monitors at the same time.
Select either Deck One, Deck Two, Tuner or AUX
when you want the second audio/video output to
remain fixed regardless of the TV view.
1. Press
6
to select this item. Subsequent pressings
of this number will cycle this feature between
AUTO, Deck One, Deck Two, Tuner and AUX.
You can also use SELECT (Mute button) to highlight
this item and
CHANGE
(LCV button) to change
this feature.
2. When the desired setting is shown on the screen,
either press MENU to exit this menu or move to
another item. Use the rear panel output jacks to
hook up the second monitor, see page 00.
* NOTE:
If you press MENU and do not get the
Features menu, continue pressing MENU
until you see the Features menu.