Go-Video 4-Head Hi-Fi - Manual (Page 43)

CHAPTER 3 - PROGRAMMING YOUR DUAL-DECK VCR 37
Tuner Setup Menu
[Menu, 1,2]
*
Use the Tuner/Channel menu to set your antenna
source and channel memory. While in the Setup menu,
press
2
.
Antenna Source
Set your antenna source. Use
CHANGE
(LCV button) to
switch between the following options: TV and CATV.
Select TV if you do not have cable. If you subscribe to
cable, select CATV.
Auto Program
Use
SELECT
(Mute button) to move to this item.
Press
CHANGE
(LCV button) to begin automatically
programming channels into memory. Auto Program
goes through all the possible TV or cable channels
one by one. Any time it finds a channel with a signal
(a channel that you receive), it programs that channel
into channel memory. Once you have run Auto Pro-
gram, the channel selector on your Dual-Deck VCR
or remote control will stop only at the channels which
you receive.
Add Channel, Delete Channel
You can add or delete any channel by using the
number keys to tune in to that channel, then using the
SELECT
(Mute button) key to move to Add or Delete and
then pressing
CHANGE
(LCV button).
Tuner Audio
This feature sets the audio output from the Dual-Deck
VCR tuner. Mono produces monaural sound for all
programs. Stereo produces stereo sound if the pro-
gram is broadcast in stereo; otherwise the sound is
mono. SAP produces Second Audio Program sound,
usually a second language. All SAP broadcasts are
mono. TV+SAP produces normal sound from one
speaker and SAP sound from the other.
1. Press 5 to select this item. Subsequent pressings
of this number will cycle this feature between
Stereo, Mono, SAP and TV+SAP.
You can also use
SELECT
(Mute button) to highlight
this item and
CHANGE
(LCV button) to change
this feature.
* NOTE:
If you press MENU and do not get the
Features menu, continue pressing MENU
until you see the Features menu.
#
#
NOTE:
For your convenience, the Tuner
Audio has been set to Stereo
(SP) at the factory.
During normal operation, the Tuner
Audio output is displayed on line 3 of the
on screen display. When the Menu
setting is Mono, Mono is displayed on
line 3. When the menu setting is Stereo,
SAP or TV+SAP, line 3 will display the
audio currently being received
on the tuned channel.
While in Tuner Setup menu, line 3 will
display ‘SAP IS AVAILABLE’ to alert you
when the audio signal being received on
the tuned station contains a Second
Audio Program (see page 38).