Gefen GTV-HDMI1.3-CAT6 - Manual (Page 12)

8
How to Connect the Extender for HDMI 1.3 Over CAT-6
1. Connect the HDMI source device to the Extender for HDMI 1.3 Over CAT-6
sender unit using the supplied HDMI cable.
2. Connect one pair of CAT-6a* cables between the VIDEO and DDC ports on
the sender and receiver.
*NOTE: This product was designed for use with CAT-6a (Augmented CAT-6)
cabling that is terminated according to the ANSI/TIA/EIA-568B specifi cation. CAT-
5e and CAT-6 cable can be used but distance ratings will be shortened. ANSI/
TIA/EIA-568A termination can be used but may cause marginal distance loss.
3. Connect the HDMI capable output device to the Extender for HDMI 1.3 Over
CAT-6 receiver using a user supplied HDMI cable.
4. Connect the included 5V DC power supplies to both the sender and receiver
units.
5. Power on the output device fi rst and the source second.
How to Operate the Extender for HDMI 1.3 Over CAT-6
There are no further steps or confi guration needed to operate the Extender for
HDMI 1.3 Over CAT-6.
CONNECTING AND OPERATING THE
EXTENDER FOR HDMI 1.3 OVER CAT-6