Gefen GTV-HDMI1.3-CAT6 - Manual (Page 9)

5
1 HDMI Input Port
Connect the HDMI source to this input port.
2 Power Indicator LED
This LED indicator will become active once the included 5V DC power adapter
has bee properly connected between the sender unit and an open wall power
socket.
3 5V DC Power Input Port
Connect the included 5V DC power supply to this input port.
4 CAT-6a Port (DDC)
Connect a ANSI/TIA/EIA-568-B terminated CAT-6a cable between this DDC port
and the DDC port on the receiving unit.
5 CAT-6a Port (VIDEO)
Connect a ANSI/TIA/EIA-568-B terminated CAT-6a cable between this VIDEO
port and the VIDEO port on the receiving unit.
SENDER UNIT PANEL DESCRIPTIONS