Installation instructions, 6b. firegrate removal (riva avanti), 6a. firegrate removal (riva) – Stovax PM235 RV66AVC User Manual

Page 24

Advertising
background image

24

6a.4 Replace the grate in the reverse order from removal.

6a.5 The grate must sit flat on the side supports, with no debris

trapped under it. Check that the centre grate sits flat and

rotates freely with no debris trapped under it.

6B. FIREGRATE REMOVAL (RIVA AVANTI)

(Tools required – None)

6b.1 To remove the firegrate first remove the centre grate:

• Disconnect the operating linkage from the grate

• Move the Primary air control to the fully open position

• Spring the operating link forward to disconnect the

balljoint

The centre grate can then be lifted out from inside of the

firebox.

11

6b.2 The main grate can then be lifted out of the firebox.

6b.3 Replace the grate system in the reverse order from removal.

6b.4 Ensure that the seal tape on the underside of the grate is in

good condition and correctly fitted. If not replace with new.

(Stovax part number 4998)

PR7061

Seal Tape

12

6b.5 The grate must sit flat on the side supports, with no debris

trapped under it. Check that the centre grate sits flat and

rotates freely with no debris trapped under it.

INSTALLATION INSTRUCTIONS

6A. FIREGRATE REMOVAL (RIVA)

6a.1 To remove grate:

• First remove the centre grate by tipping the grate control

boss downwards and lifting the centre grate vertically

PR7250

8

6a.2 The main grate can then be lifted by the front first and then

rotating the main grate to clear the firebox.

PR7241

9

6a.3 Ensure that the seal tape on the underside of the grate is

in good condition and correctly fitted. If not, replace with

new. (Stovax part number 4998)

Seal Tape

PR7061

10

Advertising
This manual is related to the following products: