Goldmund MIMESIS 24 - Manual (Page 15)

User manual - GOLDMUND MIMESIS 24 UNIVERSAL PREAMPLIFIER | P 14
3
3.2
O P E R AT I N G T H E M I M E S I S 2 4 U N I V E R S A L P R E A M P L I F I E R
R E M O T E C O N T R O L
Your Mimesis 24 has built-in remote-control for volume, balance and input selection.
The Mute circuit can also be controlled using the remote. To mute or de-mute the Mimesis
24 with the remote, press the "MUTE/STBY" key briefly.
To put the Mimesis 24 in Standby mode, press the "MUTE/STBY" key continuously until the
Mimesis 24 goes to Standby, indicated by the Standby Led on the front panel.
The remote control is used for controlling only the local zone.
The SCREEN and LIGHT keys will be used in future applications.
The VOL+ and VOL- are adjusting the global volume of the local zone.
The 4 balance keys (diamond configuration) are controlling the right/left and front/rear
balance directly, maintaining a constant global volume.
The 1 to 7 keys are selecting the source to listen.
MODE key: selection of a mode for adjustment of the format and menu functions.
CALIB key: Lights the leds selecting the remote red-inscribed functions, to adjust the level of
center and Subwoofer channels when in multi-channel operation. To deactivate, press the
CALIB key again.
TEST: activates the pink noise.
In the Test mode:
• Use the balance RIGHT and LEFT keys of the "diamond" to select one channel at a time.
The balance front and rear keys are used for adjusting the selected speaker level.
• The IN4 key makes all speakers play the pink noise together.
• The IN1 key returns the pink noise only to the selected speaker.
• The IN3 key stops the pink noise from all speakers.
• The IN2 key is a toggle switch for the pink noise on the selected speaker.
The corresponding keys of the Mimesis 24 front panel provide the same functions.