Goldmund MIMESIS 24 - Manual (Page 16)

User manual - GOLDMUND MIMESIS 24 UNIVERSAL PREAMPLIFIER | P 15
3
3.2
O P E R AT I N G T H E M I M E S I S 2 4 U N I V E R S A L P R E A M P L I F I E R
R E M O T E C O N T R O L (contd.)
In the TEST mode, Leds of the front panel indicate the speaker selection:
In Multi-channel mode, this is the meaning of the Leds:
• MODE and BALANCE (ENTER) on: indicates a Front selection
• CTRL and MUTE on: indicates a Rear selection
• IN2 on: means a left speaker (either front or rear)
• IN6 on: means a right speaker (either front or rear)
• IN4 on: Front or Rear Center
• IN3+IN4+IN5+MODE+BALANCE(ENTER)+CTRL+MUTE: Subwoofer
In 2-Channel mode:
• IN2 led on: Left channel
• IN6 led on: Right channel
The Mimesis 24 can be controlled by any RC5 coded remote-control emitter. The codes are
available upon request.
Most of the programmable transmitter units available have the capabilities to drive the
Mimesis 24 as a standard digital preamplifier, for all the specified functions.
C L E A N I N G
Always disconnect the power cord from the wall socket before cleaning your Preamplifier.
To clean the external metal of the Preamplifier, always use a clean, soft, damp cloth. Dampen
with water or a mild detergent solution. Avoid abrasive or harsh cleansers (eg. products
containing sodium carbonate).
The identification plates are gold plated. Simply clean them with a soft cloth, without any
chemical solution.
3.3