GE Brocade FastIron power supply RPS12 - Manual

Catalog Number: RSP12
Installation Instructions
IMRSP12
DESCRIPTION
FEATURES
Remote Control Smart Sweeper
Total Lighting Control
The Remote Control Smart Sweeper is an intelligent
component for simple lighting control. It provides 12
individual switch inputs and one Master input for a group
of 12 relays. Each input will accept any 2- or 3-wire
switch. The RSP12 converts any switch input to a
momentary output to drive the corresponding relay(s).
Each output can drive up to three relays in parallel.
The RSP12 also provides several advanced functions for
basic lighting automation. Besides the Master ON/OFF
function, it allows options for Time Delay and Flick
Warning for individual overrides, as well as Automatic
ON for all lights.
The RSP12 should be installed in a lighting automation
panel or an accessory cabinet as detailed on the
following page.
• 12 individual relay outputs, with up to 3 relays wired
in parallel per output.
• 12 individual switch inputs (one per relay) and one
Master input.
• Inputs accept any 2- or 3-wire switch (dry contact).
• Master ON/OFF control for group of relays while
retaining individual switch override.
• Additional control of subgroups by tying any
combination of inputs together.
• “Occupied” contact to indicate normal working hours.
• Option to turn lights on automatically at start of
normal working hours.
• Time delay in 15-minute increments up to 2 hours.
• Option to “flick warn” occupants 5 minutes before
lights go off.
Before starting, read the installation instructions inside.
If you have questions call GE Service at:
1-877-584-2685 (USA) or 1-800-661-6619 (Canada)
R
L
Y
1
RED
WHITE BLACK
MASTER
RSP12
HORTON CONTROLS COPYRIGHT 1995
437D687 REV 0
RED BLACK
BLUE
R
L
Y
2
RED
BLACK
BLUE
R
L
Y
3
RED
BLACK
BLUE
R
L
Y
4
RED
BLACK
BLUE
R
L
Y
5
RED
BLACK
BLUE
R
L
Y
6
RED
BLACK
BLUE
R
L
Y
7
RED
BLACK
BLUE
R
L
Y
8
RED
BLACK
BLUE
R
L
Y
9
RED
BLACK
BLUE
R
L
Y
1
0
RED
BLACK
BLUE
R
L
Y
1
1
RED
BLACK
BLUE
R
L
Y
1
2
ASM 437D688G
RED
BLACK WARN
YES
NO
TIME DELAY
AUTO ON
YES
NO BLUE
S
W
T
1
2
RED
BLACK
WHITE
S
W
T
1
1
RED
BLACK
WHITE
S
W
T
1
0
RED
BLACK
WHITE
S
W
T
9
RED
BLACK
WHITE
S
W
T
8
RED
BLACK
WHITE
S
W
T
7
RED
BLACK
WHITE
S
W
T
6
RED
BLACK
WHITE
S
W
T
5
RED
BLACK
WHITE
S
W
T
4
RED
BLACK
WHITE
S
W
T
3
RED
BLACK
WHITE
S
W
T
2
RED
BLACK
WHITE
S
W
T
1
RED
BLACK
WHITE
1 O
N
2
0
BLACK
POWER 24VAC
RED
BLACK
OCCUPIED
RED
WHITE
ACC. 24VRECT
BLUE
Catalog Number
RSP12
Description
Remote Control Smart Sweeper
Converts 2- or 3-wire switch inputs to momentar
y outputs.
Each switch input drives corresponding relay output.
Master Switch controls all 12 outputs.
Installation
• Wire 24VAC power to Power Input.
• Connect up to 3 relays to each Relay Output.
• Wire any 2- or 3- wire switch to Switch Inputs, including
Master Switch, if desired.
Occupied –
Close contact during normal working hours.
Opening contact turns OFF all relays and enables time delays.
• Time Delay –
Set dial in 15-minute increments (1=15min.
to 8=2 hrs. 9=1 min. test). After "occupied" hours, any
relays manually switched ON will automatically turn OFF
after the set amount of time.
• Warn – Lights "flick" 5-minutes before turning OFF at
end of day or time delay (
YES or NO).
• Auto On – Lights turn ON automatically at start of normal
working hours (
YES) or require manual switch ON (
NO).
LISTED 533F
ENERGY MANAGEMENT
EQUIPMENT SUBASSEMBL
Y
Service: 1-800-884-4852
GE Wiring Devices
Warwick, RI
Made in U.S.A.
POWER INPUT
24VAC
ACCESSORY PWR
24V RECT
MASTER SWITCH
INPUT
GE Total Lighting Control
R
SWITCH INPUTS 1 12