GE 164D3333P034 - Manual (Page 52)

Before you call for service…
52
Troubleshooting Tips
Problem Possible Causes What To Do
LOCK light is on The oven door was • Press the CLEAR/OFF pad.
when you want accidentally locked. Allow the oven to cool.
to cook Never force the door
latch handle.
“F—and a number” You have a function • If a function error code
flash in the display error code. appears during the self-
cleaning cycle, check the
oven door latch. The latch
may have been moved, even
if only slightly, from the
locked position. Make sure
the latch is moved to the
right as far as it will go.
Press the CLEAR/OFF pad.
Allow the oven to cool for
one hour. Put the oven
back into operation.
• Disconnect all power to
the range for 5 minutes
and then reconnect power.
If the function error code
repeats, call for service.
Power outage Power outage or surge. • Reset the clock. If the
oven was in use, you must
reset it by pressing the
CLEAR/OFF pad, setting the
clock and resetting any
cooking function.
Operating Instr
uctions
Installation Instr
uctions
Safety Infor
mation
Tr
oubleshooting T
ips
Customer Ser
vice