Viii. assembly – Golden Technologies GL140 User Manual

Page 27

Advertising
background image

LiteRider™ Owner’s Manual Rev.A_122810

VIII. ASSEMBLY


Be aware of any possible pinch-points when connecting the rear frame to the

front frame. Please note warning labels at pinch-points during assembly.

Pinching and crushing hazard! Increased hazards due to pinching or crushing

result due to the component weight (such as batteries) during preparation for transport and
maintenance work. Always carry out any work to be done with great care. Always try to get
help from a second person, especially when stowing parts for transport.

Pinch Point: A pinch point is an area where you MUST consider your fingers to

be sure they DO NOT become pinched between two metal areas. The greatest chance of
pinch points, become possible during the assembly of the LiteRider scooter.

-- INJURY HAZARD DUE TO IMPROPER ASSEMBLY! Ensure that all

components in the scooter have been correctly assembled. During assembly, please check
that all connecting/locking devices are holding in place.




Figure 19. LiteRider Components (4-wheel)


26

SEAT

DRIVETRAIN

FRONT FRAME

BATTERY PACK

TILLER BASKET

 

FLOOR BASKET

Advertising
This manual is related to the following products: