Stovax 8542-P8542 - Manual (Page 7)

7
6.7 Ensure that the fibreglass seal on the back of the door is intact,
locate the door on the four studs and slide back to the firebox.
Secure in place using the four dome nuts and the tool
supplied, do not over tighten the nuts, see diagram 10. Keep
the tool with these instructions for future use.
NEVER OPERATE THE STOVE WHEN THE DOOR IS
REMOVED OR WHEN THE GLASS IS BROKEN.
6.8 Place the flame baffle onto the shelf at the rear of the tray
and push up against the rear ledge, see diagram 11
6.9 Locate the front coal moulding in front of the flame baffle
ensuring that the end legs sit flat against the burner skin, see
diagram 12.
6.10 Place three large coals on the front coal so that they lean
against the flame baffle, and the four large coals on the
flame baffle so that they sit on the fingers, see diagram 13.
6.11 Place two small coals at each end of the front coal so that
they lean against the flame baffle, and a further two large
coals on the flame baffle, one at each end, see diagram 14.
6.12 Place five small coals along the rear of the flame baffle,
resting against the rear ledge, see diagram 15.
USER INSTRUCTIONS
10
Medium Claendon and Ashdon
11
12
13
14
15
AR0540
AR0365
AR0367
AR0368
AR0369
AR0366