Grizzly 1 1/2 HP Cyclone G0703 User Manual
Page 21

Model g0703/g0703p (Mfg. Since 3/12)
-19-
8. install the handle with (4)
5
⁄
16
"-18 x
3
⁄
4
" hex
bolts and (4)
5
⁄
16
" washers, as shown in
figure 17.
figure 18. hand crank installation.
9. install the hand crank on the shaft with (1)
5
⁄
16
"-18 x
3
⁄
4
" hex bolt and (1)
5
⁄
16
" flat washer,
as shown in
figure 18.
10. Attach the casters to the bottom of the drum
using (4)
3
⁄
8
"-16 nuts, (4)
3
⁄
8
" flat washers, and
(4)
3
⁄
8
" lock washers (see
figure 19).
figure 19. dust collection drum casters installed.
11. Attach the lid latches to the side of the drum
extender using (6) #10-24 x
3
⁄
8
" phillips head
screws and (6) #10-24 hex nuts, as shown in
figure 20.
note: To avoid bag snags, place the screw
heads inside of the drum with the shanks fac-
ing outward, as shown in
Figure 20.
figure 17. installing the hand rail.
handle
x 4
x 4
figure 20. lid latch installation.
x 6