Grizzly 1 1/2 HP Cyclone G0703 - Manual (Page 22)

-20-
Model g0703/g0703p (Mfg. Since 3/12)
12. place the drum extender onto the drum, see
figure 21.
figure 23. installing the dust collection bag seat.
14. place the dust collection bag seat into the
duct collection drum, as shown in figure 23.
15. insert the rubber seal over the top lip of the
drum rim, as shown in figure 24. pay special
attention to the orientation of the seal shown
in the inset of the figure.
tip: To keep the seal in place, apply a small
amount of adhesive to the drum rim at 3"–4"
intervals.
figure 24. installing canister seal.
Seal
drum
rim
optional
Adhesive
13. Secure the drum extender to the drum with
the drum clamp. Use (1) 5 ⁄
16
"-18 x 3" hex bolt
and (1) 5 ⁄
16
"-18 hex nut to secure the clamp
(see figure 22).
figure 22. installing drum extender with the
drum clamp.
drum
Clamp
x 1
figure 21. drum extender on drum.
drum
Extender
drum
drum
Clamp